BioArmor™ Technology

JTM Products Inc. has recently introduced the Kool Rite™ line of coolants for cutting and grinding.  These products are based on a new technology available only from JTM Products called BioArmor™.   With this technology, Kool Rite™ soluble oil coolants have improved the sump life two to eight times longer than the competition, with no offensive odors.  BioArmor™ offers the metal cutting industry the first safe, truly biostable coolant and the first major change in soluble oil coolant formulation in 100 years. 

 

History of Coolant Development

In the early 1900’s JTM Products, Inc., then operating as the Phoenix Oil Co., developed the first emulsified oil cutting fluid called Cut-Rite.  This water/oil combination was a great improvement over the straight oils that were the norm for all cutting and grinding fluids in use at that time. 

From that time on, coolant suppliers developed their formulas along a very standard line.  Enhancements were made with the additions rust inhibitors; improvements in alkaline stability; and biocides were developed and added to the coolants to control bacteria and fungus growth in the sumps.  In the 1970’s, concern over worker safety and EPA regulations of waste water caused the coolant manufacturers to develop safer formulations for their coolants.  Although these changes were effective in achieving the desired improvements, they did not result in any dramatic improvements in the overall performance of water soluble coolants. 

During the post 1970’s the coolant manufacturers developed new synthetic (non-oil) coolants in an attempt to improve coolant performance and eliminate the main problems with oil based.  Overall sump life was one of the aspects that improved with this technology, but major problems plagued synthetics such as rust and deposits on machines, paint stripping, and limited success on aluminum machining. 

As synthetics struggled, semi-synthetic coolants were developed.  Semi-synthetic coolants were made by replacing some of the oil in the soluble oil coolants with synthetics.  This approach improved performance and machine maintenance, but compromised the sump life of synthetic coolants. 

In the 2000’s breakthrough technology produced bio-stable soluble oil coolants, which could resist the growth of bacteria and provide very long sump life and an odor free environment.  The culmination of this effort is JTM’s BioArmorÔ Technology.  Kool Rite coolants with BioArmor Technology are the first coolants made without bactericides that provide all the advantages of oil based coolants with the long sump life of a synthetic coolant.